Fitting A Cat Flap

Fitting a cat flap can appear daunting however it's actually quite simple by following the correct instructions. Decide how high you'd like the flap to be (normally it's located at belly height). Mark this point on the door and then use the template included as a guideline to drill.

If you have a kitten that is still a newborn, gently prop the door slightly open and encourage it to walk through. Reward the kitten as it passes.

Measure the Door

A cat flap is an excellent option to let your pet leave and come into and out of your home whenever it likes. This can help keep your cat flap fitting healthy by ensuring that it gets exercise as well as being able to come back inside if left outside in the rainy weather, especially during the winter. It can also cut down on the amount of time you have to allow it in or out and will also help keep your home safe by letting you know when it has gone out.

It is essential to ensure that the cat flap fitters near me flap is placed correctly in order to prevent your pet from being forced through through it by other animals (e.g. dogs). You should determine the height of your pet's belly and the width of the doorway in your home to ensure the flap is at the correct height. You can adjust the height of your flap when your cat is taller or less than average.

Next, use a spirit-level to mark the middle of the door. This is where you will install the flap. Then, using the markings as a guideline, cut out the contour of the flap on the door with the help of a Jigsaw. After you have cut the flap and sanded the edges to create smooth surfaces. Drill any holes you need to.

Installing a cat flap ought to not take longer than two hours. The process can be slightly more complicated if you are required to put it in a uPVC door or a composite one. This is because composite doors are available in different thicknesses, which can impact the way that holes are cut. We recommend to consult with a professional when this is your first experience with glass.

Measure Your Cat

You can avoid hours of ignoring the cat's meows to be let in or out. This is especially useful for cats that are in the house during all seasons while you are at work.

It is crucial to first measure your cat before you begin the installation. It might appear to be a simple task, but it is crucial to make sure you measure the right measurements. In the event that you don't, your cat may have difficulty putting it in use.

First, ensure that your cat is calm and not feeling anxious prior to taking the measurements. You'll need to keep them in a position where they are not able to move, and make sure that the measuring tape or ruler is flat against their body, not arching in any places. You can get an accurate measurement by keeping the measuring tape or the ruler flat against the body of the animal from the top to the bottom.

Once you have your cat's measurement then you can examine the door to decide where to place the flap. Place the flap at the level of your cat's belly. This will allow them to go through the door without much effort. This will also prevent the flap making lots of noise when it swings open and shut.

You will also need to take into consideration the thickness and structure of the uPVC door or composite. While all timber doors have the same thickness to them, uPVC or composite doors can differ greatly in their overall design. This could make the process of fitting a flap for your cat more difficult as you need to ensure the hole is the right size.

You can make use of the template included in the instructions to mark the location of the hole on the door. This will allow you to see the location where the opening should be and make sure that the template is placed correctly on the door. It is also beneficial to employ a spirit-level to ensure that the template is placed perfectly against the door.

Cut the Flap

You'll need to make a hole in the door panel to install your cat flap prior to you can install it. This can be a challenging task and it is recommended that you seek out the assistance of a professional cat flap fitting service for this step should you not have the skills or experience to complete the task yourself. You can also refer to the instructions provided with the kit to learn how to do it properly.

To do this you need to take a measurement of the height of your cat's or kitten's belly and use that as an indication point. A good rule of thumb is to put the flap around 10-15 centimeters from the ground as this is the typical belly height for cats. This way your cat will be able to go through the flap comfortably and will also make other cats or snooping neighbours a tough time trying to leave or enter.

Once you've determined the location where the cat flap needs to be located, mark the location on the door using pencil. If your kit has a paper template, lay it on top of the door and use the markings to drill holes into every corner of the template. You will then be able to cut out the shape of the template and replace it with your cat flap.

You can install the cat flap yourself in a wood or uPVC door when you're confident with a jigsaw. Be sure not to cut into the mullions or rails that run vertically of your door. You can use a jigsaw to cut the panel into a circle or square depending on the design of your cat flap installation cost flap. Take your time and don't make the jigsaw cut faster.

After the hole has been cut and the flap is firmly positioned, carefully place the flap of cat food into its new location and make sure that it's securely secured. If it has caps on the screws, then place these onto the protruding screws. After the screws are installed smooth the edges and then apply sealant to any gaps. This will block drafts from entering your home.

Fit the Flap

If you have an ordinary cat flap, you can help your pet to go through it by placing a small amount cat food on the front of the door. Alternately, you can push the cat flap installer through using your hands or with a stick. Once your cat is accustomed to walking through the flap, it is likely to be able into and out as it pleases so you can let it out and in without keeping the door open for it all day (and likely in all weathers).

It is possible to put a cat flap in a UPVC door or a glass door, but it may not be as simple as installing one inside a wooden exterior door. This is because UPVC doors and some types of glass doors don't have an even thickness. This can affect how you cut the opening for the flap and can also affect whether your flap is fitted correctly after it has been installed.

Based on the type of cat flap you select It could be equipped with a mounting kit and a template that shows exactly where to drill the holes for it. If the kit does not include the template you can use a photocopier to make your own. When cutting, it's crucial to avoid pushing the jigsaw too to the point that you create a bigger hole than you need in your door.

Most cat flaps are square or rectangular in shape, but there are some that are circular, and they are usually more difficult to fit. If you have a circular flap, ensure that the hole is located in the correct spot on your door. If not, your cat might not be able to use it, and could be locked outside for the entire day (or night).

Certain models of cat flaps come with locks that let you regulate when your cat comes and goes. These are useful when your cat is scared of going out in the dark, or coming back to the house at night. They can also be helpful when you are working all day. The lock can be turned on for entry or exit and some can be locked in both directions, which allows you to close the door completely, which is especially beneficial for sick or elderly cats who aren't keen on going out in rainy weather.