You ll Never Guess This Pellet Stove Furnace s Benefits

pellet stove furnace (news)

Pellet stoves can be used as a secondary heat source or, with proper venting, a primary heating option. They can be purchased in freestanding units as well as fireplace inserts that can give your home the appearance of traditional wood-burning fireplaces.

The auger transports the pellets from the hopper to the combustion chamber which is where they burn and generate heat. Sensors detect the fire and adjust the rate of operation to ensure your desired temperature in the room.

1. Energy Efficiency

pellet stoves vs wood stoves stoves make use of a non-toxic, renewable fuel that is made from compressed sawdust and other substances. These are usually removed from landfills, but they can be used to provide a clean, efficient source of heat. They help homeowners reduce their energy consumption, and therefore greenhouse gas emissions. Many homeowners who own pellet stove insert stoves say they have recouped their initial investment in only a few years through lower heating bills.

Pellets are stronger and more compressed than natural wood, making them more efficient for burning. They also produce less creosote than traditional wood-burning fires. They are also packaged in plastic bags that seal out moisture and require less frequent cleaning.

Similar to other heating systems, pellet stoves should be properly measured and vented. A skilled technician can assess your venting and space requirements to ensure the best results.

During installation, the hearth is constructed to the right size, and the vent is installed through a hole that has been cut in the siding of your home. The vent can be run through a sidewall or a roof depending on your preference and local laws.

Once the hearth and vent are finished the outdoor pellet stove stove can be connected. Certain manufacturers provide remote controls that make starting and maintaining the fire simple and others include sensors that monitor combustion, airflow and flue temperatures, as well as pressure. When the system detects that it requires more or fewer pellets, it tells the auger to accelerate or slow down in line with the need.

All stoves have a storage hopper which can accommodate between 35 and 130 pounds of pellets. Hopper capacities determine how often the stove has to be refilled and larger hoppers allow longer intervals between refills. A grille draws fresh air out of the room and then passes it through an exchanger that then is able to blow heated air into the living space by convection. A grate or an auger distributes the pellets, and a pan underneath collects any unburnt ones as well as the ashes of combustion.

While pellet stoves are more efficient than wood-burning models they're not as efficient as natural gas furnaces or electric heaters. Electric components that drive motorized parts of the stoves require electricity. This could pose a problem in a power outage, but backup systems like batteries and generators are available.

2. Low Maintenance

Pellet stoves can be extremely efficient, however they require some care to operate properly. Cleaning your stove and exhaust vent regularly will prevent the buildup of harmful creosote, which could cause a fire or explosion that could damage the stove and/or your home.

A pellet stove burns compressed natural particles made of wood or other materials (like corn kernels, nutshells or small pieces of scrap wood). The pellets are inserted into the combustion chamber by an auger powered with electricity. The thermostat you set controls the speed at which pellets are delivered to the burner. This lets the fire remain roaring or modulate lower or even shut down in accordance with the temperature you set. When the fire is gone the ash is then thrown into an empty ash tin beneath the burner that can be easily removed and disposed.

Pellets are made from the waste products from lumber processing which could otherwise be thrown away. They are a sustainable source and produce less dust than traditional wood-burning appliances, making them a cleaner heating source. The amount of carbon monoxide, carcinogens, and other harmful chemicals emitted from pellet stoves are also much lower than the newer EPA certified wood pellet stove stoves.

These appliances are not required to be vented through a chimney, like is the case with traditional wood stoves. Instead, they can be vented properly via a wall, or any other exterior structure. Pellet stoves come with flue ports that open on the rear or top of the appliance. They are connected to an exhaust pipe that extends outside of the home.

One drawback of pellet stoves is that you have to purchase or store enough pellets to last the winter season. Pellet stove owners typically use three tons of wood pellets every winter, for a price of $200 per ton. The costs can increase over time, but it is cheaper than purchasing and transporting firewood for a traditional wood-burning fireplace or stove. You should buy enough pellets to ensure that your stove will run throughout the winter's coldest months. Also, you'll must have a space to store the pellets (preferably dry and cool).

3. Reduced Carbon Footprint

Pellet stoves produce heat using renewable biomass fuel, reducing the dependence on fossil fuels that are finite. This helps reduce the carbon footprint and helps diversify energy sources in homes.

Even the newest woodstoves that are EPA certified emit considerably less carbon dioxide than pellet stoves. The emissions from pellet stoves are also significantly less than those from gas furnaces. Pellets can be made of sawdust, bark, and other lumber remnants. They could also include soybeans, corn, or agricultural waste. When they are burned, they release less particles, which can cause respiratory issues and allergies, carcinogens and nitrous dioxide.

The feed system is the primary difference between a pellet stove and a wood stove. Pellet stoves come with hoppers to hold the pellets. When the thermostat or sensors signal that the room needs heating, the auger is turned and the pellets are fed into the combustion chamber where they burn and produce heat. The air from the combustion chamber flows through a heat exchanger that transmits the heat to the blower before releasing it into the room. This results in extremely low emissions and no creosote buildup.

When the hopper is empty, a cyclone process takes away the ash and puts it in an ash pan. The stove also features fans to circulate the fresh, heated air throughout the living area. The majority of pellet stoves require little maintenance and come with a huge viewing space for you and your family to enjoy the flames.

The most significant factor affecting pellet stove emissions is the quality of the pellets. Pellets that are not of the highest quality produce more emissions. When selecting your pellets, ensure they meet certain standards and don't contain other ingredients such as petroleum-based or urea-based products. Also, look for a manufacturer that offers a guarantee and will repair or replace components in the event of a problem. Some states offer homeowners a tax credit when they choose to go greener. This is a great opportunity to offset the initial cost of this type of stove and make it easier to install.

4. Reduced Noise

Pellet stoves produce a minimal amount of smoke or exhaust compared to wood-burning fireplaces. A fan is used to spread heat more evenly across the room. This is the reason why pellet stoves require less maintenance than wood stoves. While wood stoves have to be cleaned regularly of particulates and chemicals pellet stoves require an specialized metal vacuum cleaner for regular cleaning.

Many manufacturers have made a conscious effort to design their stoves to be easy to set up and to operate as well as maintain. Their appliances are available in various styles that are designed to match the decor of your home. Some models include a programmable thermostat and remote control as well as a WIFI applications that allow you to control and monitor your stove from any location in the world.

The majority of pellet stoves come with an enormous fuel hopper that can hold between 35 and 130 pounds of pellets. The pellets are then fed into the combustion chamber via an auger. The output of heat and the level at which the fire gets depends on the speed at which pellets are fed into the burner. The hopper can be filled with either hardwood pellets (from dense wood species like oak and hickory) or softwood pellets (from pine and fir). Many stoves can use biomass pellets made of switchgrass and corn. This is a green alternative.

Pellet stoves emit less smoke and require less maintenance because they use more clean fuel than fireplaces that burn wood. They also do not require a chimney, which makes them a better choice for new constructions or retrofits.

Unlike wood stoves, which require regular maintenance to keep free of creosote and other chemicals, pellet stoves need to be periodically inspected for proper operation and maintenance. Depending on the model, this may include a periodic inspection and cleaning of the accumulation of the ash or "clinker," as well as the motor and fans. Your appliance dealer will be able to provide the proper procedures for your brand and model. He can also assist you to identify the right fuel for your stove, and give information regarding storage and safety.